Paddy thresher
Landforce Paddy Thresher is used for the harvesting of paddy grain. The husks and grain are entirely separated and blown in opposite direction because
FIND DEALER NEAR YOUHome/Paddy thresher
Landforce Paddy Thresher is used for the harvesting of paddy grain. The husks and grain are entirely separated and blown in opposite direction because
FIND DEALER NEAR YOULandforce Paddy Thresher is used for the harvesting of paddy grain. The husks and grain are entirely separated and blown in opposite direction because of its fanning and delivering system. The grains obtained from the Dasmesh Paddy Thresher fetches 3 to 5 % extra earnings for the farmers unlike oth
Landforce Paddy Thresher is used for the harvesting of paddy grain. The husks and grain are entirely separated and blown in opposite direction because of its fanning and delivering system.The grains obtained from the Dasmesh Paddy Thresher fetches 3
Show More
Landforce Paddy Thresher is used for the harvesting of paddy grain. The husks and grain are entirely separated and blown in opposite direction because of its fanning and delivering system.The grains obtained from the Dasmesh Paddy Thresher fetches 3
Show More
Hopper was fabricated by using mild matel plate. Main function of the hopper is to control the feed rate without choking of machine. A hopper plate is provided with to control the passage of material from the hopper.
Show More
Belt and pulley mechanism is used to transmit the power from the PTO to the shaft of the flywheel.
Show More
Waste material in the threshing unit gets into the blower then the blower blows out the waste material.
Show More
Thresher is provided with wheels at its legs, so that transportation can be done easily. These wheels are made mostly with cost iron but new and large capacity threshers are equipped with pneumatic wheels for better performance during transportation.
Show More
A very strong frame is provided in the thresher on which all the functional parts are attached. The frame is made usually of heavy angle iron sections. It should be strong enough to sustain vibrations of machine, during its operation in the field.
Show More
|
MODEL |
THP |
|
THRESHING DRUM |
|
|
TYPE |
BAR TYPE |
|
DIAMETER |
815 MM / 32 INCH |
|
WIDTH |
1676 MM / 66 INCH |
|
NO. OF SPIKE |
80 |
|
NO. OF BIOWER |
ONE |
|
NO. OF CLEANING BLOWER |
PROVIDED |
|
BLOWER SPEED |
FIXED |
|
SIEVES |
THREE |
|
LOAD WHEEL |
TWO |
|
THRESHER HEADER |
|
|
FEEDING TYPE |
DIRECT FEEDING |
|
THRESHER GEARBOX |
|
|
DRIVE |
MAIN SHAFT |
|
RANGE OF SPEED CORRESPONDING TO ENGINE RPM |
FIXED (700 RPM) |
|
CONCAVE |
PADDY |
*Company reserves the rights to change/amend products specifications without any prior notice.
